FPGA-Based Low-Power Signed Approximate Multipliers
FPGA-Based Low-Power Signed Approximate Multipliers for Diverse Error-Resilient Applications
Abstract:
The Booth algorithm is widely used for efficient signed multiplication due to its ability to reduce partial prod-ucts. A higher radix Booth multiplier generates fewer partial products, while it also increases hardware complexity in the generator, diminishing the advantage of fewer accumulators. Previous optimizations of generators and accumulators were designed for application-specific integrated circuits (ASICs), but their performance gains cannot be comparably translated to field-programmable gate arrays (FPGAs) due to differences in architecture. This article proposes FPGA-friendly approximate Booth multipliers that combine approximate hybrid-radix partial product generation with resource-efficient accumulation tech-niques. Initially, to improve generation efficiency, an look-up table (LUT)-reused exact radix-8 generator is introduced through logical partitioning to integrate two types of partial products into a single LUT. In addition, approximate adjacent-compensation radix-8 and radix-16 generators are developed based on the Booth encoding bit-repetition principle. Later, to speed up partial product accumulation, an overlap-parallel accumulation scheme and various accumulators are proposed, reducing compression steps and enhancing resource utilization. Last, performance-configurable hybrid radix-8/-16 approximate Booth multipliers are designed to meet the needs of different error-resilient applica-tions. The most hardware-efficient configuration of the proposed 16-bit multiplier reduces power–delay product (PDP) and LUT consumption by 38.31% and 35.66%, respectively, compared with the exact multiplier. Furthermore, the proposed designs offer a better balance between accuracy and hardware com-plexity than existing approximate multipliers. The practicality of these multipliers is demonstrated in both joint photographic experts group (JPEG) image compression and finite impulse response (FIR) filtering applications.
” Thanks for Visit this project Pages – Register This Project and Buy soon with Novelty “
FPGA-Based Low-Power Signed Approximate Multipliers for Diverse Error-Resilient Applications
